QD1 Hammer Finish

Dacrylate-logo

QD1 Hammer Finish

Reference No.: 5H-Line

A modified alkyd with metallic and coloured pigments typically used as a decorative ‘hammered’ enamel finish for metalwork.

Colours available : Supplied in a range of colours, click for Colour Charts
Appearance Of Dried Film : Sheen
Theoretical Coverage : Approximately 10m² per litre depending on film thickness applied
Drying Time At 20°C :
(will vary with temperature, air movements, etc.) Touch Dry : 20 minutes
Film Dry : 2 hours
Overcoat : N/A
Packaging : 5 litre containers
Shelf Life : 12 months in unopened containers when stored under cover in good storage conditions.
Storage : Under cover with temperature range of 5°C to 32°C.
Surface Preparation : Ensure that surfaces are clean and dry. Maybe applied direct to mild steel, however, corrosion resistance will be limited due to the low film thickness in the ‘hammer’ pattern.
Suitable primers : Steel Dacrylate primer.
Aluminium and other Non-Ferrous Metals : Dacrelate 2-Pack Primer.
Application : Apply by conventional spray. Addition of up to 20% of Dacrylate Thinner R11 may be required to achieve optimum spray characteristics and hammer pattern.
Clean-up : Dacrylate Thinner R11.
Health and Safety : For more information request relevant Material Safety Datasheet.